6mm Sticky Spacer Pads -Buy Now
Spaces number plate 6mm from mounting surface to avoid projections and/or to allow for slight curvature. One set contains 3 self-adhesive pads.
Instructions For Fitting
1. Clean all wax and dirt from fixing area, and reverse of number plate.
2. The spacer pad must be checked to make sure that it accommodates the slight curves on some mounting surfaces and projections on others.
3. Apply three pads in position to reverse of number plate.
4. Remove protective film from pads, press plate firmly into position. Hold for ten seconds to ensure good contact.
Adhesive fixers are designed to bond to painted metal surfaces. Bonding to other matials is not recommended.